![]() When the water dispenser has been thoroughly rinsed, reinstall the water guard and drip tray. ![]() Use two or more gallons of water to rinse the unit if there is still a vinegar or bleach smell of taste. Once all of the cleaning solution has been dispensed from the water dispenser begin to add water to the reservoirs, in order to remove any lingering vinegar or bleach. Alternate dispensing the cleaning solution from the hot and cold water spigot to ensure clean spigots on both options. Let the cleaning solution sit for 15 minutes before dispensing it from the spigots. When you are ready to disinfect the hot and cold water reservoirs simply pour the remaining cleaning solution into the water dispensers’ reservoirs. If the drip tray does not detach from the water dispenser use a microfiber cloth that has been dipped in the cleaning solution and thoroughly wipe. Remove and clean the drip guard (if applicable). After cleaning it with the solution, rinse and set aside to dry. Remove the water guard, or also known as the puncturing needle, and clean with the cleaning solution. If the buildup is stubborn, use a paste of baking soda and water. With a clean microfiber cloth, dip the cloth into your cleaning solution and gently wipe. Remove the water bottle and inspect the water bottle holder and valve for any possible mildew or buildup that might have accumulated. Remove the water bottle and clean the water bottle holder. To ensure that the water dispenser is safe to sanitize, unplug the water cooler from the electrical outlet and allow for the hot water reservoir to cool. If you choose to use bleach, we recommend adding 1 tablespoon of unscented chlorine bleach to every gallon of water. White vinegar - 1/2 gallon of water + 1/2 gallon of vinegarīleach - 1 gallon of water + 2 tablespoons of bleachĮnsure that all necessary cleaning items are at hand and prepare to clean an empty water dispenser. We recommend white vinegar or bleach and suggest using the following amounts: When preparing to sanitize your water dispenser, it's important to choose an effective cleaning agent against bacteria, germs, and mineral buildup. You can find the user manuals for Brio Cooler products here! Consult the user manual to properly and safely perform this.Īlways ensure the hot water reservoir tank has cooled before taking any steps to empty the water tanks. The parts and inner workings of coolers vary by brand and model, so consult the manual to prevent causing any damage.Īlways empty the water cooler before taking steps to clean. Before you begin the cleaning process, here are a few things to note:Īlways read and follow the manufacturers’ user manual when performing any maintenance on your water dispenser. ![]() It is best to clean your water dispenser when you are ready to replace the water bottle or filtration system. If you thoroughly clean your cooler every three to six months (depending on usage), your water will maintain its quality. It's easy to avoid contamination of your water. If you don't clean your cooler, this buildup can make its way into your water, affecting the overall taste.Īlthough it is uncommon, microbes can also be found in unsanitized coolers, due to its humid environment. Here's why you need to clean your dispenser: Minerals from your water source build up over time, causing a white or brown residue on surfaces within your cooler. In fact, making sure that your cooler is sanitized is essential to maintaining the quality of your drinking water. You may not initially think that an appliance that dispenses clean water needs to be cleaned, but it does.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |